Figure 3-73: Sas Configuration - AudioCodes Mediant 2000 User Manual


To configure the Stand-Alone Survivability parameters:
1. Open the 'SAS Configuration' page (Configuration tab > Protocol Configuration
menu > SAS submenu > Stand Alone Survivability
2. Configure the parameters as described in ''SIP Configuration Parameters''
260 .
3. Click the Submit
4. To save the changes to flash memory, refer to ''
To configure the SAS Routing table, under the SAS Routing group, click the SAS Routing
Table button to open the 'IP2IP Routing Table' page. For a description of this table,
refer to ''Configuring the IP2IP Routing Table (SAS)'' on page 126.
SIP User's Manual
Figure 3-73: SAS Configuration Page
button to apply your changes.
126
page item).
Saving Configuration'' on page
Document #: LTRT-68809
Mediant 2000
on page
173 .