Figure 3-103: Software Upgrade Key With Multiple S/N Lines - AudioCodes Mediant 2000 User Manual
Media gateway
Hide thumbs
Also See for Mediant 2000:
- User manual (702 pages) ,
- Installation manual (44 pages) ,
- Hardware installation manual (30 pages)
Table of Contents
Advertisement
•
Multiple S/N lines (as shown below):
Figure 3-103: Software Upgrade Key with Multiple S/N Lines
a.
b.
5.
Verify that the Software Upgrade Key file was successfully loaded to the device, by
using one of the following methods:
•
In the 'Key features' group, ensure that the features and capabilities activated by
the installed string match those that were ordered.
•
Access the Syslog server (refer to the Product Reference Manual
that the following message appears in the Syslog server:
"S/N___ Key Was Updated. The Board Needs to be Reloaded with ini file\n".
6.
Reset the device; the new capabilities and resources are active.
Note:
3.4.2.2.1 Loading via BootP/TFTP
The procedure below describes how to load a Software Upgrade Key to the device using
AudioCodes' BootP/TFTP Server utility (for a detailed description on the BootP utility, refer
to the Product Reference Manual).
To load a Software Upgrade Key file using BootP/TFTP:
1.
Place the Software Upgrade Key file (typically, a *.txt file) in the same folder in which
the device's cmp
2.
Start the BootP/TFTP Server utility.
3.
From the Services menu, choose Clients; the 'Client Configuration' screen is
displayed.
SIP User's Manual
in the 'Send Upgrade Key file' field, click the Browse
the folder in which the Software Upgrade Key text file is located on your PC.
Click the
Send File
button; the new key is loaded to the device and
validated. If the key is valid, it is burned to memory and displayed in the
'Current Key' field.
If the Syslog server indicates that the Software Upgrade Key file was
unsuccessfully loaded (i.e., the 'SN_' line is blank), perform the following
preliminary troubleshooting procedures:
1.
Open the Software Upgrade Key file and check that the S/N line
appears. If it does not appear, contact AudioCodes.
2.
Verify that you've loaded the correct file. Open the file and ensure that
the first line displays [LicenseKeys].
3.
Verify that the contents of the file has not been altered in any way.
file is located.
178
Mediant 2000
button and navigate to
) and ensure
Document #: LTRT-68809
Advertisement
Table of Contents
Troubleshooting
