3.
In the 'IP Group Table' page (refer to ''Configuring the IP Groups''
configure the two IP Groups #1 and #2. Assign Proxy Sets #1 and #2 to IP Groups #1
and #2 respectively.
Figure 9-9: Configuring IP Groups #1 and #2 in the IP Group Table Page
4.
In the 'Trunk Group Table' page (refer to "Configuring the Trunk Group Table" on page
155), enable the Trunks connected between the Enterprise's PBX and the device
(Trunk Group ID #1), and between the local PSTN and the device (Trunk Group ID
#2).
Figure 9-10: Assign the Trunk to Trunk Group ID #1 in the Trunk Group Table Page
5.
In the 'Trunk Group Settings' page (refer to ''Configuring the Trunk Group Settings''
page
157
IP Group).
Figure 9-11: Configuring Trunk Group #1 for Registration per Account in Trunk Group Settings
SIP User's Manual
),
configure 'Per Account' registration for Trunk Group ID #1 (without serving
Page
444
Mediant 2000
on page
107
Document #: LTRT-68809
),
on