Routing Table Configuration Summary And Guidelines; Figure 10-4: Interface Column - AudioCodes Mediant 2000 User Manual

10.9.2.2.4 Interface Column
This column defines the interface index (in the Multiple Interface table) from which the
gateway address is reached.
10.9.2.2.5 Metric Column
The Metric column must be set to 1 for each routing rule.

10.9.2.3 Routing Table Configuration Summary and Guidelines

The Routing table configurations must adhere to the following rules:

Up to 25 different routing rules may be defined.

T he user may choose whether to specify "Prefix Length" or "Subnet Mask". There is no
need to specify both.

If both "Prefix Length" and "Subnet Mask" are defined, the "Prefix Length" overrides
the "Subnet Mask".

The "Gateway" IP Address must be available on one of the local subnets.

The "Interface" column must be set to the Interface that the "Gateway" is configured
on.

The "Metric" column must be set to 1.

The Routing Table configuration, unlike the Multiple Interface table configuration is
online. Therefore, the changes made to the routing rules are applied immediately.
SIP User's Manual

Figure 10-4: Interface Column

464
Mediant 2000
Document #: LTRT-68809