AudioCodes Mediant 2000 User Manual page 281

SIP User's Manual
Parameter
Web/EMS: Proxy Name
[ProxyName]
Web: Redundancy Mode
EMS: Proxy Redundancy Mode
[ProxyRedundancyMode]
Web: Proxy IP List Refresh Time
EMS: IP List Refresh Time
[ProxyIPListRefreshTime]
Web: Enable Fallback to Routing
Table
EMS: Fallback Used
[IsFallbackUsed]
Web/EMS: Prefer Routing Table
[PreferRouteTable]
Web/EMS: Always Use Proxy
[AlwaysSendToProxy]
Version 5.8
Defines the Home Proxy Domain Name. If specified, the Proxy
Name is used as the Request-URI in REGISTER, INVITE, and
other SIP messages, and as the host part of the To header in
INVITE messages. If not specified, the Proxy IP address is
used instead.
The value must be string of up to 49 characters.
Determines whether the device switches back to the primary
Proxy after using a redundant Proxy.

[0] Parking = device continues working with a redundant
(now active) Proxy until the next failure, after which it works
with the next redundant Proxy (default).

[1] Homing = device always tries to work with the primary
Proxy server (i.e., switches back to the primary Proxy
whenever it's available).
Note: To use ProxyRedundancyMode, enable Keep-alive with
Proxy option (EnableProxyKeepAlive = 1 or 2).
Defines the time interval (in seconds) between each Proxy IP
list refresh.
The range is 5 to 2,000,000. The default interval is 60.
Determines whether the device falls back to the 'Tel to IP
Routing' table for call routing when Proxy servers are
unavailable.

[0] Disable = Fallback is not used (default).

[1] Enable = 'Tel to IP Routing' table (or 'Outbound IP
Routing' table) is used when Proxy servers are unavailable.
When the device falls back to its 'Tel to IP Routing' table
'Outbound IP Routing' table), the device continues scanning
for a Proxy. When the device locates an active Proxy, it
switches from internal routing back to Proxy routing.
Note: To enable the redundant Proxies mechanism, set the
parameter EnableProxyKeepAlive to 1 or 2.
Determines if the device's internal routing table takes
precedence over a Proxy for routing calls.

[0] No = Only a Proxy server is used to route calls (default).

[1] Yes = The device checks the routing rules in the 'Tel to
IP Routing' table for a match with the Tel-to-IP call. Only if
a match is not found is a Proxy used.
Determines whether the device sends SIP messages and
responses through a Proxy server.

[0] Disable = Use standard SIP routing rules (default).

[1] Enable = All SIP messages and responses are sent to a
Proxy server.
Note: Applicable only if Proxy server is used (i.e., the
parameter IsProxyUsed is set to 1).
281
6. Configuration Parameters Reference
Description
(or
October 2009