Isdn And Cas Interworking Parameters; Table 6-45: Isdn And Cas Interworking Parameters - AudioCodes Mediant 2000 User Manual

SIP User's Manual
Parameter
[ISDNOutCallsBehavior_x]
6.12

ISDN and CAS Interworking Parameters

The ISDN- and CAS interworking parameters are described in the table below.
Parameter
ISDN Parameters
Web/EMS: Enable ISDN Tunneling
Tel to IP
[EnableISDNTunnelingTel2IP]
Web/EMS: Enable ISDN Tunneling
IP to Tel
[EnableISDNTunnelingIP2Tel]
Version 5.8
Same as the description for parameter ISDNOutCallsBehavior, but
for a specific trunk ID.

Table 6-45: ISDN and CAS Interworking Parameters

Enables ISDN Tunneling.

[0]

[1]
to SIP using a proprietary SIP header.

[2]
SIP using a dedicated message body.
When ISDN Tunneling is enabled, the device sends all ISDN
PRI messages using the correlated SIP messages. The ISDN
SETUP message is tunneled using SIP INVITE, all mid-call
messages are tunneled using SIP INFO, and ISDN
DISCONNECT / RELEASE is tunneled using SIP BYE
messages. The raw data from the ISDN is inserted into a
proprietary SIP header (X-ISDNTunnelingInfo) or a dedicated
message body (application/isdn) in the SIP messages.
Note:
ISDNDuplicateQ931BuffMode to 128 (i.e., duplicate all
messages).
Enables ISDN Tunneling to the Tel side.

[0]

[1]
ISDN PRI using a proprietary SIP header.

[2]
PRI using a dedicated message body.
When ISDN Tunneling is enabled, the device extracts raw
data received in a proprietary SIP header (X-
ISDNTunnelingInfo) or a dedicated message body
(application/isdn) in the SIP messages and sends the data as
ISDN messages to the PSTN side.
6. Configuration Parameters Reference
Description
Description
Disable = Disable (default).
Using Header = Enable ISDN Tunneling from ISDN PRI
Using Body = Enable ISDN Tunneling from ISDN PRI to
For this feature to function, you must set the parameter
Disable = Disable (default).
Using Header = Enable ISDN Tunneling from SIP to
Using Body = Enable ISDN Tunneling from SIP to ISDN
325 October 2009