3.1.9.1.2 Replacing the Corporate Logo with Text
The corporate logo can be replaced with a text string instead of an image. To replace
AudioCodes' default logo with a text string using the ini file, configure the ini file parameters
listed in the table below. (For a description on using the ini file, refer to ''Modifying an ini
File'' on page 201.)
Table 3-2: ini File Parameters for Replacing Logo with Text
Parameter
UseWebLogo
WebLogoText
Note:
3.1.9.2
Customizing the Product Name
You can customize the product name (text) that appears in the Title bar, using the ini file
parameters listed in the table below. (For a description on using the ini file, refer to
''Modifying an ini File'' on page 201.)
Table 3-3: ini File Parameters for Customizing Product Name
Parameter
UseProductName
UserProductName
SIP User's Manual
[0]
= Logo image is used (default).
[1] = Text string used instead of a logo image.
Text string that replaces the logo image.
The string can be up to 15 characters.
When a text string is used instead of a logo image, the Web browser's title bar
displays the string assigned to the WebLogoText parameter.
Defines whether or not to change the product name:
[0]
= Don't change the product name (default).
[1] = Enable product name change.
The text string that replaces the product name.
The default is 'Mediant 2000'.
The string can be up to 29 characters.
Description
Description
48
Mediant 2000
Document #: LTRT-68809