Deleting A Scenario; Figure 3-19: Scenario Loading Message Box; Figure 3-20: Message Box For Confirming Scenario Deletion - AudioCodes Mediant 2000 User Manual

3.1.8.6

Deleting a Scenario

You can delete the Scenario by using the Delete Scenario File button, as described in the
procedure below:

To delete the Scenario:
1. On the Navigation bar, click the Scenarios
you to confirm:
2. Click OK
3. Click the
confirmation for deletion.

Figure 3-20: Message Box for Confirming Scenario Deletion

4. Click OK ; the Scenario is deleted and the Scenario mode closes.
Note:
SIP User's Manual

Figure 3-19: Scenario Loading Message Box

; the Scenario mode appears in the Navigation tree.
Delete Scenario File
You can also delete a Scenario using the following alternative methods:
•
Loading an empty
page 43 ).
•
Loading an ini file with the ScenarioFileName parameter set to no value
(i.e., ScenarioFileName = "").
tab; a message box appears, requesting
button; a message box appears requesting
dat file (refer to ''Loading a Scenario to the Device''
44
Mediant 2000
on
Document #: LTRT-68809