AudioCodes Mediant 2000 User Manual page 384

Parameter
Web: Max Digits in Phone
Num
EMS: Max Digits in Phone
Number
[MaxDigits]
Web: Inter Digit Timeout for
Overlap Dialing [sec]
EMS: Interdigit Timeout (Sec)
[TimeBetweenDigits]
SIP User's Manual

If the parameter DialPlanIndex is configured (to select a dial
plan index), then the parameter DigitMapping is ignored.

For a detailed description of the digit mapping, refer to ''Digit
Mapping'' on page 401
Defines the maximum number of collected destination number
digits that can be received from the Tel side
overlap dialing is performed. When the number of collected digits
reaches the maximum, the device uses these digits for the called
destination number.
The valid range is 1 to 49. The default value is 30.
Note: Digit Mapping Rules can be used instead.
Defines the time (in seconds) that the device waits between digits
that are received from the Tel side when Tel-to-IP overlap dialing is
performed (ISDN uses overlap dialing) . When this inter-digit timeout
expires, the device uses the collected digits to dial the called
destination number.
The valid range is 1 to 10. The default value is 4.
384
Description
.
when Tel-to-IP ISDN
Document #: LTRT-68809
Mediant 2000