AudioCodes Mediant 2000 User Manual page 494

Function
DC Power Consumption
Environmental (DC)
Environmental (AC)
Hot Swap
Enclosure Dimensions
Weight
Installation
cPCI Blade
Control Processor
Control Processor
Memory
Signal Processors
PCI Bus Interface
Physical
Supply Voltages and
Power Consumption
(typical)
Environmental
Cooling
Diagnostics
Front panel Status LEDs
Syslog events
SNMP MIBs and Traps
SIP User's Manual

1 or 2 span: 28.8 W

4 spans: 32.8 W

8 spans: 36.4 W

Operating Temp: 0 to 40°C (32 to 104°F)

Short Term Operating Temp (per NEBS): 0 to 55°C (32 to 131°F)

Storage: -40 to 70°C (-40 to 158°F)

Humidity: 10 to 90% non-condensing

Operating Temp: 0 to 40°C (32 to 104°F)

Storage: -40 to 70°C (-40 to 158°F)

Humidity: 10 to 90% non-condensing

cPCI blades are full hot-swappable

Power supplies are redundant, but not hot-swappable
445 x 44 x 300 mm (17.5 x 1.75 x 12 inches)
Approx. 4.8 kg fully populated (16 spans); 4.2 kg for 1 span
1U 19-inch 2-slot cPCI chassis; rack-, shelf-, or desktop-mount options.
Rack mount using two side brackets - 2 additional (rear) side brackets
optional
Motorola PowerQUICC 8260
SDRAM 64* - 128 MB (*on 60-channel models)
AudioCodes AC486 VoIP DSP based on TI DSP TMS5541 – each core
at 133 MHz
33 MHz, 32 bit, slave mode (PICMG 2.0 revision 2.1)
6U single cPCI slot. PICMG 2.0, R2.1 and R2.16 and R.3.0
CompactPCI™ blade

480 channels: 40.7 W; 3 A at 5 V; 7.8 A at 3.3 V

240 channels: 24 W; 1.5 A at 5 V; 5 A at 3.3 V

120 channels: 18.4 W; 0.9 A at 5 V; 4.2 A at 3.3 V
Humidity: 10 to 90% non-condensing

500 Linear Feet per Minute (LFM) at 50
480 ports
°

400 LFM at 50 C ambient temp. supporting 400 ports
°C ambient temp. supporting 240 ports

300 LFM at 50

E1/T1 status

LAN status

Status of device (Fail, ACT, Power, and Swap Ready)
Supported by Syslog Server, per RFC 3164 IETF standard.
SNMP v2c; SNMP v3
494
Specification
°
C ambient temp. supporting
Document #: LTRT-68809
Mediant 2000