Mediant - AudioCodes Mediant 2000 User Manual

SIP User's Manual
Parameter
Web/EMS: Debug Level
[GwDebugLevel]
Web: Activity Types to
Report via Activity Log
Messages
[ActivityListToLog]
Version 5.8

[4] Start & Connect & End Call = CDR report is sent to Syslog at the
start, at connection, and at the end of each call.
The CDR Syslog message complies with RFC 3161 and is identified by:
Facility = 17 (local1) and Severity = 6 (Informational).
Syslog debug logging level.

[0] 0 = Debug is disabled (default).

[1] 1 = Flow debugging is enabled.

[2] 2 = Flow and device interface debugging are enabled.

[3] 3 = Flow, device interface, and stack interface debugging are
enabled.

[4] 4 = Flow, device interface, stack interface, and session manager
debugging are enabled.

[5] 5 = Flow, device interface, stack interface, session manager, and
device interface expanded debugging are enabled.
Note: Usually set to 5 if debug traces are needed.
The Activity Log mechanism enables the device to send log messages
(to a Syslog server) for reporting certain types of Web operations
according to the below user-defined filters.

[PVC] Parameters Value Change = Changes made on-the-fly to
parameters.

[AFL] Auxiliary Files Loading = Loading of auxiliary files (e.g., via
'Certificate' page).

[DR] Device Reset = Reset of device via the 'Maintenance Actions'
page.

[FB] Flash Memory Burning = Burning of files or parameters to flash
(in 'Maintenance Actions' page).

[SWU] Device Software Update = cmp file loading via the Software
Upgrade Wizard.

[ARD] Access to Restricted Domains = Access to restricted domains,
which include the following Web pages:

(1) ini parameters (AdminPage)

(2) 'General Security Settings'

(3) 'Configuration File'

(4) 'IPSec/IKE' tables

(5) 'Software Upgrade Key'

(6) 'Internal Firewall'

(7) 'Web Access List'

(8) 'Web User Accounts'

[NAA] Non Authorized Access = Attempt to access the Web interface
with a false or empty user name or password.

[SPC] Sensitive Parameters Value Change = Changes made to
sensitive parameters:

(1) IP Address

(2) Subnet Mask

(3) Default Gateway IP Address

(4) ActivityListToLog
For example: ActivityListToLog = 'pvc', 'afl', 'dr', 'fb', 'swu', 'ard', 'naa',
'spc'
243
6. Configuration Parameters Reference
Description
October 2009