Figure 3-61: Sip General Parameters - AudioCodes Mediant 2000 User Manual


To configure the general SIP protocol parameters:
1. Open the 'SIP General Parameters' page (Configuration tab > Protocol
Configuration menu > Protocol Definition submenu > SIP General Parameters
page item).
2. Configure the parameters as required.
3. Click the Submit
4. To save the changes to flash memory, refer to ''
SIP User's Manual
Figure 3-61: SIP General Parameters Page
button to save your changes.
100
Saving Configuration'' on page
Document #: LTRT-68809
Mediant 2000
173 .