Figure 7-4: Configuring Proxy Set Id #1 In The Proxy Sets Table; Figure 7-5: Configuring Ip Groups #1 And #2 In The Ip Group Table - AudioCodes Mediant 2000 User Manual

SIP User's Manual
In the 'Proxy Sets Table' page (refer to ''Proxy Sets Table'' on page 141), configure two
2.
Proxy Sets and for each, enable Proxy Keep-Alive (using SIP OPTIONS) and 'round
robin' load-balancing method:
•
Proxy Set #1 includes two IP addresses of the first ITSP (ITSP 1) - 10.33.37.77
and 10.33.37.79 - and using UDP.
•
Proxy Set #2 includes two IP addresses of the second ITSP (ITSP 2) - 10.8.8.40
and 10.8.8.10 - and using TCP.
The figure below displays the configuration of Proxy Set ID #1. Perform similar
configuration for Proxy Set ID #2, but using different IP addresses.
Figure 7-4: Configuring Proxy Set ID #1 in the Proxy Sets Table Page
In the 'IP Group Table' page (refer to ''Configuring the IP Groups'' on page 201),
3.
configure the two IP Groups #1 and #2. Assign Proxy Sets #1 and #2 to IP Groups #1
and #2 respectively.
Figure 7-5: Configuring IP Groups #1 and #2 in the IP Group Table Page
Version 5.6 375
7. IP Telephony Capabilities
November 2008