Figure 9-8: Configuring Ip Groups #1 And #2 In The Ip Group Table - AudioCodes Mediant 3000 User Manual

3. In the 'IP Group Table' page (refer to ''Configuring the IP Groups'' on page 120),
configure the two IP Groups #1 and #2. Assign Proxy Sets #1 and #2 to IP Groups #1
and #2 respectively.
Figure 9-8: Configuring IP Groups #1 and #2 in the IP Group Table Page
4. In the 'Trunk Group Table' page (refer to "Configuring the Trunk Group Table" on page
168), enable the Trunks connected between the Enterprise's PBX and the device
(Trunk Group ID #1), and between the local PSTN and the device (Trunk Group ID
#2).
Figure 9-9: Assign the Trunk to Trunk Group ID #1 in the Trunk Group Table Page
5. In the 'Trunk Group Settings' page (refer to ''Configuring the Trunk Group Settings'' on
page 170), configure 'Per Account' registration for Trunk Group ID #1 (without serving
IP Group).
Figure 9-10: Configuring Trunk Group #1 for Registration per Account in Trunk Group Settings
SIP User's Manual
Page
490
Mediant 3000
Document #: LTRT-89707