Configuring Digital Gateway Parameters - AudioCodes Mediant 1000B User Manual

User's Manual
Parameter
Collet ANI
[CasStateMachineCollectANI]
Digit Signaling System
[CasStateMachineDigitSignalin
gSystem]
22.4

Configuring Digital Gateway Parameters

The Digital Gateway Parameters page allows you to configure miscellaneous digital
parameters. For a description of these parameters, see ''Configuration Parameters
Reference'' on page 1273.

To configure the digital gateway parameters:
1. Open the Digital Gateway Settings page (Setup menu > Signaling & Media tab >
Gateway folder > Digital Gateway > Digital Gateway Settings).
2. Configure the parameters as required.
3. Click Apply.
Version 7.2
CAS state machine).
In some cases, when the state machine handles the ANI
collection (not related to MFCR2), you can control the state
machine to collect ANI or discard ANI.

[0] No = Don't collect ANI.

[1] Yes = Collect ANI.

[-1] Default = Default value - use value from CAS state
machine.
Defines which Signaling System to use in both directions
(detection\generation).

[0] DTMF = Uses DTMF signaling.

[1] MF = Uses MF signaling (default).

[-1] Default = Default value - use value from CAS state
machine.
Figure 22-4: Digital Gateway Parameters Page
Description
485 Mediant 1000B Gateway & E-SBC
22. Digital PSTN