Configuring Digital Gateway Parameters - AudioCodes Mediant 800B User Manual

21.4

Configuring Digital Gateway Parameters

The Digital Gateway Parameters page allows you to configure miscellaneous digital
parameters. For a description of these parameters, see ''Configuration Parameters
Reference'' on page 783.

To configure the digital gateway parameters:
1. Open the Digital Gateway Parameters page (Configuration tab > VoIP menu > GW
and IP to IP > Digital Gateway > Digital Gateway Parameters).
2. Configure the parameters as required.
3. Click Submit.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 626.
User's Manual
Figure 21-4: Digital Gateway Parameters Page
366
Mediant 800B Gateway and E-SBC
Document #: LTRT-10620