Configuring The Routing Tables - AudioCodes MediaPack MP-124 User Manual

SIP User's Manual
Parameter
TON
Phone Context
3.4.4.4

Configuring the Routing Tables

The Routing Tables submenu allows you to configure the device's call routing. This
submenu includes the following page items:
Routing General Parameters (refer to ''Routing General Parameters'' on page 153)
Tel to IP Routing (refer to ''Tel to IP Routing Table'' on page 156)
IP to Hunt Group Routing (refer to ''IP to Hunt Group Routing'' on page 159)
Internal DNS Table (refer to ''Internal DNS Table'' on page 162)
Internal SRV Table (refer to ''Internal SRV Table'' on page 163)
Reasons for Alternative Routing (refer to ''Reasons for Alternative Routing'' on page
164)
3.4.4.4.1 Routing General Parameters
The 'Routing General Parameters' page allows you to configure the device's IP-to-Tel and
Tel-to-IP routing parameters.
To configure the general routing parameters, take these 4 steps:
1. Open the 'Routing General Parameters' page (Configuration tab > Protocol
Configuration menu > Routing Tables submenu > Routing General Parameters
page item).
Version 5.4
Select the Number Type assigned to this entry.
If you selected Unknown as the NPI, you can select Unknown [0].
If you selected Private as the NPI, you can select Unknown [0],
Level 2 Regional [1], Level 1 Regional [2], PSTN Specific [3], or
Level 0 Regional (Local) [4].
If you selected E.164 Public as the NPI, you can select Unknown
[0], International [1], National [2], Network Specific [3], Subscriber
[4], or Abbreviated [6].
The Phone-Context SIP URI parameter.
Figure 3-68: Routing General Parameters Page
Description
153
3. Web-Based Management
May 2008