Configuring The Routing Tables; Table 5-19: Phone-Context Parameters - AudioCodes MediaPack MP-11X User Manual

Parameter
Add Phone Context As Prefix
[AddPhoneContextAsPrefix]
NPI
TON
Phone Context
5.5.4

Configuring the Routing Tables

The Routing Tables submenu is used to configure the gateway's IP-to-Tel and Tel-to-IP
routing tables and their associated parameters:
General Parameters (refer to 'General Parameters' on page 127)
Tel to IP Routing Table (refer to 'Tel to IP Routing Table' on page 129)
IP to Hunt Group Routing (refer to 'IP to Hunt Group Routing' on page 132)
Internal DNS Table (refer to 'Internal DNS Table' on page 134)
Internal SRV Table (refer to 'Internal SRV Table' on page 135)
Reasons for Alternative Routing (refer to 'Reasons for Alternative Routing' on page
136)
Release Cause Mapping (refer to Release Cause Mapping)
SIP User's Manual

Table 5-19: Phone-Context Parameters

Determines whether or not the received Phone-Context parameter is
added as a prefix to the outgoing Called and Calling numbers.
Valid options include:
[0] Disable = Disable (default).
[1] Enable = Enable.
Select the Number Plan assigned to this entry.
You can select the following:
[0] Unknown = Unknown (default)
[1] E.164 Public = E.164 Public
[9] Private = Private
Select the Number Type assigned to this entry.
If you selected Unknown as the NPI, you can select Unknown [0].
If you selected Private as the NPI, you can select Unknown [0],
Level 2 Regional [1], Level 1 Regional [2], PSTN Specific [3], or
Level 0 Regional (Local) [4].
If you selected E.164 Public as the NPI, you can select Unknown
[0], International [1], National [2], Network Specific [3], Subscriber
[4], or Abbreviated [6].
The Phone-Context SIP URI parameter.
126
Description
Document #: LTRT-65409
MediaPack Series