Krds Host Call - Konica Minolta 7020 Service Manual

HOME
KRDS
3. Setting regular count calling
The copier will call the host at the regular count
specified.
(1) Screen selection
Select the [3. Calling mode-3] (regular count) in the
calling time set menu screen to display the Calling
mode-3 (regular count call) setting screen.
Press the [RETURN] key to exit the Calling mode-3
(Regular count call) setting screen and return to the
calling time set menu screen.
(2) Setting method
a. Using the numeric keys on the screen, enter 6-
digit number, regular count value, then press the
[SET] key.
b. To reenter the entered data, press the Stop/clear
button to clear the entered data then enter the data
again.
c. The entered numerical value is entered from the
number of 4 digit. The number is displayed while
shifting from right to left.
d. The screen will return to the calling time set menu
screen if the [RETURN] key is pressed without
pressing the [SET] key. In this case, no entered
data will be changed.
e. Press the [SET] key then the [RETURN] key to
end the setting. The screen will return to the calling
time set menu screen.
Step Operation procedure
1 Enter the 25 mode.
2 [25 mode menu screen]
Press the [9. KRDS setting ] key.
3 [KRDS setting menu screen]
Press the [1. Calling time set] key.
4 [Calling time set menu screen]
Use the [3. Calling mode-3] (regular count).
5 [Calling mode-3 (regular count call) setting
screen]
Using the numeric keys on the screen, enter
number, regular count value, then press the
[SET] key.
6 Press the [RETURN] to end the setting.
[6]

KRDS Host Call

If the machine is connected to a KRDS, it can call the host
at the service center.
a. Select the [JAM history] (JAM-related trouble call),
[SC history] (SC-related trouble call), [No TONER],
[No PAPER], [COPY QUALITY] (Copy quality-
related trouble call) or [OTHER REASON] (Other
call), depending upon the particular circumstances.
KRDS host menu
1. JAM history
2. SC history
3. NO TONER
4. NO PAPER
5. COPY QUALITY
6. OTHER REASON
b. When the [Start] key is pressed, the machine starts
calling the host.
Caution: Do not turn OFF the power during
communication.
6-16