Dell PowerConnect B-RX Configuration Manual page 1321

Configuring PMRI
PMRI is enabled by default. To disable PMRI, enter commands such as the following.
BigIron RX(config)# ipv6 router pim
BigIron RX(config-ipv6-pim-router)# hardware-drop-disable
Syntax: [no] hardware-drop-disable
Displaying hardware-drop
Use the show ipv6 pim sparse command to display if the hardware-drop feature has been enabled
or disabled.
BigIron RX#show ipv6 pim sparse
Global PIM Sparse Mode Settings
Hello interval
Bootstrap Msg interval: 60
Join/Prune interval
SSM Enabled: Yes
SSM Group Range: ff30::/12
Hardware Drop Enabled : Yes
Syntax: show ipv6 pim sparse
Displaying PIM sparse configuration information and statistics
You can display the following PIM Sparse information:
•
•
•
•
•
•
•
•
•
•
•
•
BigIron RX Series Configuration Guide
53-1001810-01
: 30
: 60
Basic PIM Sparse configuration information
Group information
BSR information
Candidate RP information
RP-to-group mappings
RP information for a IPv6 PIM Sparse group
RP set list
IPv6 PIM Neighbor information
The IPv6 PIM flow cache
The IPv6PIM multicast cache
IPv6 PIM traffic statistics
IPv6 PIM counter statistics
IPv6 PIM sparse
Neighbor timeout
Candidate-RP Advertisement interval: 60
SPT Threshold
49
: 105
: 1
1249