Index to the CLI Commands
This appendix lists the CLI commands discussed in this configuration guide. Look for the CLI
command alphabetically by feature. You can also use your browser's search function to find the
command you want. When you find the command, click on the link to display the section that
discusses that command.
ACLs (IP)
Numbered ACL
Commands
access-list <num> deny | permit <ip-protocol>
<source-ip> | <hostname> <wildcard> [<operator>
<source-tcp/udp-port>] <destination-ip> | <hostname>
<wildcard> [<operator> <destination-tcp/udp-port>]
[match-all <tcp-flags>] [match-any <tcp-flags>]
[<icmp-type>] [established] [precedence <name> |
<num>]
[tos <number>] [dscp-matching <number>]
[802.1p-priority-matching <number>] [dscp-marking
<number> 802.1p-priority-marking <number>
internal-priority-marking <number>] | [dscp-marking
<number> dscp-cos-mapping] | [dscp-cos-mapping]
[fragment] [non-fragment] [first-fragment] [fragment-offset
<number>] [spi <00000000 - ffffffff>] [log]
access-list <num> deny | permit host <ip-protocol> any
any [log]
access-list <num> deny | permit icmp any any [log]
<icmp-type> | <type-number> <code-number>
access-list <num> deny | permit any I <source-ip>
|<source-ip>/<mask-bits> | <hostname> <wildcard>
[log]
access-list <acl-num> remark [<comment-text>]
no access-list <acl-number>
<entire-deny-or-permit-statement>
show access-list <acl-num> | all
BigIron RX Series Configuration Guide
53-1001810-01
See ...
"Configuring extended numbered ACLs"
"Enabling ACL filtering of fragmented or
non-fragmented packets"
on page 557
"ICMP filtering for extended ACLs"
"Configuring standard numbered ACLs"
"Numbered ACLs: adding a comment"
"Numbered ACLs: deleting a comment"
"Deleting ACL entries"
on page 549
"Displaying ACL definitions"
on page 533
Appendix
E
on page 520
on page 558
on page 518
on page 547
on page 548
1311