Dell PowerConnect B-RX Configuration Manual page 1323

TABLE 218
This field...
Interface
TTL Threshold
Local Address
Displaying IPv6 PIM inteface information
You also can display IPv6 multicast interface information using the show ipv6 pim interface
command.
BigIron RX# show ipv6 pim
Interface v30
PIM Version : V2 MODE : PIM SM
TTL Threshold: 1, Enabled
DR: fe80::20c:dbff:fef6:a00 on e3/2
Link Local Address: fe80::20c:dbff:fef5:e900
Global Address: 1e1e::4
Interface v167
PIM Version : V2 MODE : PIM SM
TTL Threshold: 1, Enabled
DR: itself
Link Local Address: fe80::20c:dbff:fef5:e900
Global Address: a7a7::1
Interface l1
PIM Version : V2 MODE : PIM SM
TTL Threshold: 1, Enabled
DR: itself
Link Local Address: fe80::20c:dbff:fef5:e900
Global Address: 8c8c::4
Displaying a list of multicast groups
To display IPv6 PIM group information, enter the following command at any CLI level.
BigIron RX>show ipv6 pim group
Total number of groups: 11
Group ff7e:a40:2001:3e8:27:0:1:2
Syntax: show ipv6 pim [group
BigIron RX Series Configuration Guide
53-1001810-01
Displays...
The type of interface and the interface number. The interface type can be one
of the following:
•
•
The number is either a port number (and slot number if applicable) or the
virtual interface (VE) number.
Following the TTL threshold value, the interface state is listed. The interface
state can be one of the following:
•
•
Indicates the IP address configured on the port or virtual interface.
Group member at e3/1: v31
Ethernet
VE
Disabled
Enabled
Ports
49
IPv6 PIM sparse
1251