Configuring IPv6 Multicast Features
In this chapter
IPv6 PIM sparse
This chapter presents the multicast features available for IPv6 routers.
The BigIron RX supports IPv6 Protocol Independent Multicast (PIM) Sparse. IPv6 PIM Sparse
provides multicasting that is especially suitable for widely distributed multicast environments.
In an IPv6 PIM Sparse network, an IPv6 PIM Sparse router that is connected to a host that wants to
receive information for a multicast group must explicitly send a join request on behalf of the
receiver (host).
FIGURE 139
BigIron RX Series Configuration Guide
53-1001810-01
•
IPv6 PIM sparse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1239
•
Multicast Listener Discovery and source specific multicast protocols(MLDv2) 1258
Example IPv6 PIM Sparse domain
Port3/8
VE 1
IPv6 PIM Sparse
router A
Source for Group
fec0:1111::1
IPv6 PIM Sparse
router B
Port2/1
Port2/2
Rendezvous Point (RP) path
Shortest Path Tree (SPT) path
Chapter
49
This interface is also the
Bootstrap Router (BR) and
the Rendezvous Point (RP)
Port3/8
VE 1
IPv6 PIM Sparse
router C
Receiver for Group
ff02::200:2
1239