Show Crypto Certificate - Dell X1000 Series User Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Command Mode
User EXEC mode
Example
The following example displays the active system image file that was loaded by
the device at startup and the system image file that will be loaded after rebooting
the switch:
console# show bootvar
Image Filename
----- ---------
1 image-1
2 image-2
"*" designates that the image was selected for the next boot

show crypto certificate

The show crypto certificate Privileged EXEC mode command displays the
device SSL certificates and key-pair for both default and user defined keys.
Syntax
show crypto certificate [mycertificate] [number]
Parameters
number
• —Specifies the certificate number. (Range: 1,
Default Configuration
Certificate number 1.
Command Mode
Privileged EXEC mode
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
372
CLI
Guide\Dell_Astute_CLI_new.fm
Version Date
--------- ---------------------
1.1.0.73 19-Jun-2011
1.1.0.73 19-Jun-2011
Status
-----------
18:10:49 Not active*
18:10:49 Active
2)