Viewing The Serial Number; Reading The Event Log - Visonic PowerMaster-10 Installer's Manual

Fully supervised wireless alarm control system
Hide thumbs Also See for PowerMaster-10:
Table of Contents

Advertisement

7.7 Viewing the Serial Number

The menu "SERIAL NUMBER" allows reading the system serial number and panel ID for support purposes only.
Panel ID is a unique number of the control panel that is used for registering the PowerMaster-10 to
PowerManage when using GPRS.
To View the Serial Number
1.
10:SERIAL NUMBER
2.
0907030000.
3.
JSMivory 0.2.22
4.
Panel ID: 100005

8 READING THE EVENT LOG

Events are stored in the event log. You can access this log and review the events, one by one. If the event log
fills up completely, the oldest event is deleted upon registration of each new event.
The date and time of occurrence are memorized for each event.
When reading the event log, events are shown in chronological order - from the newest to the oldest. Access to the
event log is provided by clicking the
process of the event log is shown below.
8.1 Reading the Event Log
READY 00:00
1.
2.
ENTER CODE:
LIST OF EVENTS
3.
Z13 alarm
09/02/10 3:37 P
4.
D-303145
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
The PowerMaster-10 display will read serial number of the unit.
The PowerMaster-10 display will read the version of the unit.
The PowerMaster-10 display will read the panel ID of the unit.
Clicking the
button at any stage in the procedure will take you to
"
".
SERIAL NUMBER
Clicking the
button repeatedly at any stage in the procedure
takes you one level up with each click. Clicking the
take you to "
<OK> TO EXIT
button and not through the installer's menu. The reading and erasing
While the system is in the normal operating mode, press the
Enter the current installer code.
The latest event is shown.
The event is displayed in two parts, for example, "Z13 alarm" then
"09/02/10 3:37 P".
Press the
button repeatedly to scroll through the list of events.
Clicking the
button repeatedly at any stage in the procedure
takes you one level up with each click. Clicking the
take you to "
<OK> TO EXIT
".
".
button will
key.
button will
85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents