Table of Contents
Advertisement
MENUS AND FUNCTIONS
B.13 Enabling and disabling the squawk option
The PowerMaster-360 system (and its wireless sirens) can be set to produce a short "Squawk" of audible
feedback to assist you when you use a keyfob to arm (1 beep) and disarm (2 beeps) the PowerMaster-360
system.
Here you can enable / disable the Squawk.
Carefully read the section titled "Additional Information" according to the indicated references
table at end of this section.
1.
SQUAWK
Squawk ON
2.
or
Squawk OFF
3.
Squawk OFF
☺
Return to step 1
1
For detailed instructions on how to select User Settings – refer to sections A.1 and A.2.
2
a. The display shows the currently selected setting (indicated by a
b. You can now enable (ON) or disable (OFF) the Squawk option using the
3
The
symbol now appears next to the new selected option.
4
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).
B.14 Programming the Scheduler
The PowerMaster system can be enrolled with wireless input/output (I/O) expanders, which include PGM
outputs that can be used to open and close an electrically-controlled gate, or to control a preferred electrical
device via keyfobs or according to a programmable weekly time schedule.
Here you can schedule PGM outputs for up to 4 different ON/OFF time activations per any desired day or days
of the week. In addition, you can schedule a "Daily" schedule that applies to every day of the week. It is
recommended to complete the Scheduler table (placed at the end of this section) before programming the
Scheduler.
Carefully read the section titled "Additional Information" according to the indicated references etc. – see
the table at the end of this section.
1.
SCHEDULER
2.
PGM No. --
B. To Set the Day
2
Sunday
3.
or
36
Enter the [USER SETTINGS] menu, select the [
.
1
The display shows the currently selected setting.
Click the
or
setting, for example, "Squawk OFF" and press the
☺
A "Success Tune"
then returns to the User Settings menu, step 1.
Additional Information (section B.13)
Enter the [USER SETTINGS] menu, select the [SCHEDULER] option and
press
.
1
Select the PGM number 01 to 16. Press
The 1
st
day of the scheduler is displayed.
Click the
or
to schedule or "Daily", for example, "Tuesday".
button until the display reads the desired
sounds. The display confirms the saved setting, and
symbol), for example, [
button until the display reads the day you wish
2
D-307082 PowerMaster 360 User's Guide
1
etc. – see
] option and press
SQUAWK
2
button to confirm.
3, 4
Squawk ON
or
button.
.
].
Advertisement
Table of Contents
