Visonic PowerMaster-10 Installer's Manual page 51

D. To Enable Voice Reports to User by SMS
1.
04:COMMUNICATION
2.
1:PSTN/GSM
or
3.
4:PRIVATE REPORT
4.
VOICE REPORT
5.
SMS REPORT
6.
REPORTED EVENTS
7.
disable report
E. To Configure Event Types to be Reported to Private Telephones by SMS
Here you determine which event groups will be reported to private telephone subscribers by SMS.
Term
"all"
"all (-op/cl)"
"all (-alerts)"
"alarms"
"alerts"
"op/cl"
"disable report"
Note: "All" means all events including the L. BAT and AC FAIL trouble messages.
Note: All the above options can be reported to private telephone subscribers by SMS.
The following siren signal will be sent to private telephone upon event reporting:
FIRE: ON - ON - ON - pause.... (- - - - - - ......).
BURGLAR: ON continuously (
EMERGENCY/LATCHKEY: 2-tone siren; like an ambulance.
or
8.
9.
REPORTED EVENTS
F. To Program SMS Phone Numbers and to Configure Event Types to be Reported to User by SMS
1.
04:COMMUNICATION
2.
50
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
Description
All messages
All messages, except open/close
All messages, except alerts
Alarm messages
Alert messages
Open/close
No message will be reported
...)
Select between "disable report", "all", "all (-op/cl)", "all(-
alerts)", "alarms", "alerts" and "op/cl".
You can now press the
menu, or press the
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
button to take you to the "
button to take you to "
<OK> TO EXIT
st
"
1 SMS tel #
".
D-303145