Visonic PowerMaster-10 Installer's Manual page 49

B. To Configure Event Types to be Reported to Private Telephones
Here you determine which event groups will be reported to private telephone subscribers.
Term
"alarms+alerts"
"alarms"
"alerts"
"disable report"
The following siren signal will be sent to private telephone upon event reporting:
FIRE: ON - ON - ON - pause.... (- - - - - - ......).
BURGLAR: ON continuously (
EMERGENCY/LATCHKEY: 2-tone siren; like an ambulance.
or
6.
7.
REPORTED EVENTS
C. To Program Private Phone Numbers and to Configure Event Types to be Reported to User
1.
04:COMMUNICATION
2.
1:PSTN/GSM
or
3.
4:PRIVATE REPORT
4.
VOICE REPORT
5.
REPORTED EVENTS
6.
1st private tel#
7.
8.
1st PRIVATE TEL. NO.
9.
1st private tel#
10.
2nd private tel#
11.
12.
2nd PRIVATE TEL. NO.
48
Description
Alarm and alert messages
Alarm messages
Alert messages
No message will be reported
...)
Select between "disable report", "alarms+alerts", "alarms"
and "alerts".
You can now press the
" menu, or press the
tel#
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
Enter the first private telephone number (including area code, if required)
of the private subscriber to which the system will report the event groups.
Enter the second private telephone number (including area code, if
required) of the private subscriber to which the system will report the event
groups.
button to take you to the "
button to take you to "
1st private
".
<OK> TO EXIT
D-303145