Physical Properties; Peripherals And Accessory Devices; Installation; Choosing The Mounting Location - Visonic PowerMaster-10 Installer's Manual

Report Destinations
Reporting Format Options
Pulse Rate
Message to Private Phones
Ring Detection

2.5 Physical Properties

Operating Temp. Range
Storage Temp. Range
Humidity
Size
Weight
Color

2.6 Peripherals and Accessory Devices

Modules
Additional wireless devices
Wireless Devices and
peripherals (*):
(*) Visonic is currently developing
many more devices
peripherals that will be available
during 2011.

3. INSTALLATION

3.1 Choosing the Mounting Location

To ensure the best possible mounting location of the PowerMaster-10 control panel, the following points should
be observed:
•
Mount the system approximately in the center of the installation site between all the transmitters
•
In close proximity to an AC source and a telephone line connection (if PSTN is used)
•
Far from sources of interference, such as:
Electrical noise and strong electromagnetic sources, such as computers, television, power conductors,
cordless phones, light dimmers, etc.
Large metal objects (such as metal doors and metal closets)
Note: A distance of at least 1 meter (3 ft) is recommended.
•
Make sure that the signal reception level for each transmitter's signal, shown during the Diagnostics test of
the PowerMaster-10, is "Strong" or "Good".
•
The alarm can be heard during HOME mode.
•
Wireless magnetic contacts should be installed in a vertical position and as high up the door or window as
possible.
•
Wireless detectors should be installed at the height specified in their Installation Instructions
D-303145
2 Monitoring Stations, 4 private telephones
SIA, Pulse 4/2 1900/1400 Hz, Pulse 4/2 1800/2300 Hz, Contact ID,
Scancom, SIA IP, Visonic PowerNet.
10, 20, 33 and 40 pps - programmable
Tone
The unit does not support ring detection without DC voltage present on the
telephone lines.
14°F to 120°F (-10°C to 49°C)
-4°F to 140°F (-20°C to 60°C)
85% relative humidity, @ 30°C (86°F)
196 x 180 x 55 mm (7-5/8 x 7 x 2 in.)
658g (23 Oz) (with battery)
White
GSM/GPRS, IP (future use)
30 detectors, 8 keyfobs, 8 keypads, 2 sirens, 4 repeaters
Magnetic Contact: MC-302 PG2
Motion Detectors: Next PG2; Next K9 PG2
PIR Camera Detectors: Next CAM PG2; Next CAM-k9 PG2
Smoke Detector: SMD-426 PG2/ SMD-427 PG2
and
Keyfob: KF-234 PG2
Keypad: KP-140 PG2/KP-141 PG2 (with proximity tag)
Indoor Siren: SR-720 PG2
Outdoor Siren: SR-730 PG2
Repeater: RP-610 PG2
7