08:USER SETTINGS
09:FACTORY DEFLT
10:SERIAL NUMBER
11:START UL/DL
<OK> TO EXIT
Returns to first
option
Programming User Settings
This mode provides you with a gateway to the user functions through the regular user programming menu.
To Enter the User Settings Menu
1.
USER SETTINGS
2.
Caution! If after having programmed the user codes the system does not recognize your installer code,
this indicates you must have programmed a user code that is identical with your installer code. If so,
access the user menu and change the code that is identical with your installer code. This will re-validate
your installer code.
16
Chapter 5.
Use to enter the USER SETTINGS menu to perform user settings. See
section 4.2.
Use to restore the control panel to factory defaults. See section 7.6.
Use to read the serial number of the control panel. See section 7.7.
Use to initiate the upload/download process. See Chapter 6.
Use to exit from the "INSTALLER MODE" menu back to Main Menu. See
section 4.3.
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
Refer to the PowerMaster-10 User Guide for detailed procedures
Clicking the
you one level up with each click. Clicking the
"
".
<OK> TO EXIT
button repeatedly at any stage in the procedure takes
button will take you to
D-303145