Configuring Event Reporting To Monitoring Station - Visonic PowerMaster-10 Installer's Manual

FORCE HOME NETW.
36.
SESSION TIMEOUT
37.
off on timeout
38. or
39.
SESSION TIMEOUT
Key Functionality
Moves the cursor from left to right.
Long press for speed.
Moves the cursor from right to left.
Long press for speed.
Scrolls upward the sequence of inserted digits.
Long press for speed.
Scrolls downward the sequence of inserted digits.
Long press for speed.
Places cursor to extreme right position of edit string and shows the last 16 digits of edit string.
Reverts to previous or top menu without saving the edit string.
Reverts to "<OK> TO EXIT" without saving the edit string.
Saves and reverts to previous menu.
Clears all digits to the right of cursor.
Clears one digit by cursor.
Selects between uppercase or lowercase digits.

4.7.3 Configuring Event Reporting to Monitoring Station

Here you determine which types of event will be reported to Monitoring Stations. Due to lack of space in the
display, abbreviations are used: alarm is "alrm", alert is "alrt" and open/close is "o/c". The asterisk ( ) is a
separator between events reported to Monitoring Station 1 and events reported to Monitoring Station 2.
Messages are divided by type into the following groups:
Group
Alarms
Open/close
Alerts
Maintenance
"Alarm" group has the highest priority and "Alert" group has the lowest priority.
D-303145
Here you determine whether the control panel will stay continuously
connected via GPRS communication, or, temporarily connected to receive
event reports only.
Select between "off on timeout" and "always ON".
You can now press the
menu, or press the
Abbr. Events Reported
alrm Fire, Burglary, Panic, Tamper
o/c Arming AWAY, Arming HOME, Disarming
Alrt No-activity, Emergency, Latchkey
- Low-battery AC failure
button to take you to the "
button to take you to "
<OK> TO EXIT
"
GPRS REPORT
".
39