Define Custom Locations - Visonic PowerMaster-10 Installer's Manual

4.11 DEFINE CUSTOM LOCATIONS

This mode allows you to define up to 5 locations (in addition to the locations that can be defined in the ZONES /
DEVICES mode - see par. 4.5).
To Define Custom Locations
1.
06:CUSTOM NAMES
2.
CUST. ZONES NAME
3.
EDIT USER TERM 1
4.
Custom 1
5.
EDIT USER TERM 1
Key Functionality
Moves the cursor from left to right.
Long press for speed.
Moves the cursor from right to left.
Long press for speed.
Scrolls upward the sequence of inserted digits.
Long press for speed.
Scrolls downward the sequence of inserted digits.
Long press for speed.
Places cursor to extreme right position of edit string and shows the last 16 digits of edit string.
Reverts to previous or top menu without saving the edit string.
Reverts to "<OK> TO EXIT" without saving the edit string.
Saves and reverts to previous menu.
Clears all digits to the right of cursor.
Clears one digit by cursor.
Selects between uppercase or lowercase digits.
70
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
Enter the first custom location.
Note: The table at the end of this section provides a list of the keys used
by the PowerMaster-10 editor.
Press the or
" - –
USER TERM 2 EDIT USER TERM 5
Clicking the button repeatedly at any stage in the procedure
takes you one level up with each click. Clicking the
take you to "
<OK> TO EXIT
button and repeat the procedure for "
", as required.
".
EDIT
button will
D-303145