Configuring Panic Alarm Activation; Enabling Latchkey Arming - Visonic PowerMaster-10 Installer's Manual

4.9.6 Configuring Panic Alarm Activation

Here you determine whether the user will be allowed to initiate a panic alarm by simultaneous pressing of either
the two panic buttons (on the keypad / wireless commander) or away + home (on a keyfob transmitter). Audible
panic activates the siren and simultaneously transmits a message via telephone. Silent panic only transmits a
message via telephone.
The options are: silent panic, audible panic (default) and disable panic.
To Configure Panic Alarm Activation
1.
03:CONTROL PANEL
2.
01:ENTRY DELAY 1
or
3.
12:PANIC ALARM
4.
audible panic
or
5.
6.
12:PANIC ALARM

4.9.7 Enabling Latchkey Arming

Here you determine whether the system can be armed in the latchkey mode. If the system is armed this way, a
"latchkey" message will be sent to specific telephones upon disarming by a "latchkey user" (users 5-8 or keyfob
transmitters 5-8). This mode is useful when parents at work want to be informed of a child's return from school.
The options are: Latchkey ON and Latchkey OFF (default).
To Enable Latchkey Arming
1.
03:CONTROL PANEL
2.
01:ENTRY DELAY 1
or
3.
20:LATCHKEY
4.
Latchkey OFF
or
5.
6.
20:LATCHKEY
D-303145
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
Select between "silent panic", "audible panic" and "disable
panic".
You can now press the
menu in "
03:CONTROL PANEL
" ".
<OK> TO EXIT
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
Select between "Latchkey ON", and "Latchkey OFF".
or button to program any other
" or press the button to take you to
65