Enabling The Memory Prompt; Enabling Keyfob Low Battery Acknowledgement - Visonic PowerMaster-10 Installer's Manual

4.10.6 Enabling the Memory Prompt

Here you determine whether the user will receive indication that an alarm has been activated.
Available options are: enable (default) and disable.
To Enable the Memory Prompt
1.
03:CONTROL PANEL
2.
01:ENTRY DELAY 1
or
3.
28:MEMORY PROMPT
4.
enable
or
5.
6.
28:MEMORY PROMPT

4.10.7 Enabling Keyfob Low Battery Acknowledgement

Here you determine whether the user will hear or will not hear low battery sound when he tries to disarm the
system with a keyfob whose battery voltage is low.
Available options are: keyfob L-B on - the user has to acknowledge the keyfob low battery message, or, keyfob
L-B off (default) - the user does not have to acknowledge the keyfob low battery message.
To Enable Keyfob Low Battery Acknowledgement
1.
03:CONTROL PANEL
2.
01:ENTRY DELAY 1
or
3.
31:LOW-BAT ACK
4.
keyfob L-B off
or
5.
6.
31:LOW-BAT ACK
D-303145
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
Select between "enable" and "disable".
You can now press the
menu in "
03:CONTROL PANEL
" ".
<OK> TO EXIT
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
Select between "keyfob L-B on" and "keyfob L-B off".
You can now press the
menu in "
03:CONTROL PANEL
" ".
<OK> TO EXIT
or button to program any other
" or press the
or button to program any other
" or press the
button to take you to
button to take you to
69