Event Reporting Configuration; General; Setup Report Communicators - Visonic PowerMaster-10 Installer's Manual

4.7 Event Reporting Configuration

4.7.1 General

The PowerMaster-10 system uses an IP platform that supports GSM and GPRS cellular communication to
forward all events received at the control panel to the monitoring station.

4.7.2 Setup Report Communicators

4.7.2.1 Configuring PSTN / GSM Communicators
1.
04:COMMUNICATION
2.
1:PSTN/GSM
3.
AREA CODE
TEL. AREA CODE
4.
5.
AREA CODE
6.
LINE PREFIX
LINE PREFIX
7.
8.
LINE PREFIX
9.
DIAL METHOD
10.
Pulse
11.
or
12.
DIAL METHOD
13.
GSM KEEP ALIVE
14.
disable
15. or
16.
36
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
Enter the system tel. area code (up to 4 digits).
Enter the number that is used as a prefix to access an outside telephone
line (if exists).
Here you determine the dialing method used by the automatic dialer built
into the PowerMaster-10 control panel.
Select between "Pulse" and "tone (dtmf)".
Here you prevent the GSM Service provider from disconnecting the GSM
line if the user has not initiated any outgoing telephone calls during the
last 28 days.
Select between "disable" and "every 28 days".
D-303145