Visonic PowerMaster-10 Installer's Manual page 45

To enter a series of digits, use the following keys:
<Numeric keypad> - to enter the number
- moves the cursor from left to right
- moves the cursor from right to left
- deletes everything after the cursor (to the right)
4.7.3.5 Configuring the Report Method (Protocol) to Monitoring Station
Continue below from the previous section or repeat steps 1 to 4 of section 4.7.3.1 before continuing with the
following instructions:
REPORT EVENTS
or
1.
PSTN RPRT FORMAT
2.
SIA
3.
or
4.
PSTN RPRT FORMAT
5.
4/2 PULSE RATE
6.
20 pps
7.
or
8.
4/2 PULSE RATE
4.7.3.6 Configuring the Number of Retry Attempts
Continue below from the previous section or repeat steps 1 to 4 of section 4.7.3.1 before continuing with the
following instructions:
REPORT EVENTS
or
1.
PSTN RPRT RETRY
2.
4 attempts
3.
or
4.
PSTN RPRT RETRY
44
Here you select the reporting format used by the control panel to report
events to Monitoring Stations.
Select between "SIA",
"Scancom", "SIA text" and "contact ID".
Here you select the pulse rate at which data will be sent to Monitoring
Stations if any one of the 4/2 formats has been selected in PSTN Report
Format.
Select between "10 pps", "20 pps", "33 pps" and "40 pps".
You can now press the
" menu, or press the
RETRY
".
EXIT
Here you determine the number of times the communicator will dial the
Monitoring Station's number via PSTN.
Select between "2 attempts", "4 attempts", "8 attempts", "12
attempts" and "16 attempts".
"4/2
1900/1400",
button to take you to the "
button to take you to "
"4/2
1800/2300",
PSTN RPRT
<OK> TO
D-303145