Configuring Event Reporting To User - Visonic PowerMaster-10 Installer's Manual

RECENT CLOSE
9.
ZONE RESTORE
10.
report restore
11. or
12.
ZONE RESTORE
13.
SYS INACT REPORT
14.
disable
15. or
16.
SYS INACT REPORT

4.7.4 Configuring Event Reporting to User

A. To Enable Voice Report to User
1.
04:COMMUNICATION
2.
1:PSTN/GSM
or
3.
4:PRIVATE REPORT
4.
VOICE REPORT
REPORTED EVENTS
5.
disable report
D-303145
Here you determine whether a zone restore will be reported or not.
Select between "report restore" and "don't report".
Here you determine whether the Monitoring Station will receive a
message if the system is inactive (not armed) during a defined period
(days).
Select between "disable", "rep. after 7d", " rep. after 14d ", "
rep. after 30d", and "rep. after 90d".
You can now press the
" menu (see section 4.7.2.1), or press the
EVENTS
you to " ".
<OK> TO EXIT
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
button to take you to the "
REPORT
button to take
47