Configuring Remote Programming Access Permissions - Visonic PowerMaster-10 Installer's Manual

or
49.
50.
PGM: BY LINE FAIL
B. To Configure PGM Lighting Devices in Alarm Conditions and To Set Daytime Limits of Lighting Devices
1.
05: OUTPUTS
2.
DEFINE PGM
3.
PGM: GENERAL DEF
4.
LOCKOUT TIME
5.
start – HH:MM
6.
TIME 07:00A
7.
start – HH:MM
8.
stop – HH:MM
9.
TIME 07:00P
10.
stop – HH:MM

4.13 Configuring Remote Programming Access Permissions

1.
04:COMMUNICATION
2.
74
Select between "by line fail NO" and "by line failYES".
Clicking the
takes you one level up with each click. Clicking the
take you to "
<OK> TO EXIT
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
Enter the time at which you wish the lockout state to begin (usually at
dawn).
Note: AM and PM are selected by clicking
respectively.
Enter the time at which you wish the lockout state to end (usually in the
evening).
Note: AM and PM are selected by clicking
respectively.
Clicking the
takes you one level up with each click. Clicking the
take you to "
<OK> TO EXIT
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
button repeatedly at any stage in the procedure
".
button repeatedly at any stage in the procedure
".
button will
and ,
and ,
button will
D-303145