Adding Wired Zones - Visonic PowerMaster-10 Installer's Manual

• 24 Hour Zone - Silent. - Upon detection, this zone initiates a silent alarm, meaning that the sirens do not
function. Instead the PowerMaster-10 dials telephone numbers and reports the event to Monitoring Stations
and/or to private telephones, as programmed.
• 24 Hour Zone - Audible. - Upon detection, this zone initiates a siren alarm. The PowerMaster-10 also dials
telephone numbers and reports the event to Monitoring Stations and/or to private telephones, as
programmed.
4.5.2.4 Locations
You can select or assign a named location to a detector (e.g. Garage, Front Door etc.). 31 locations can be
selected, 26 fixed names and 5 custom names (defined by the installer).
Note: Custom Locations can be defined via the "
appear on your location list in addition to the default names.
Note: To facilitate assigning a location name to a device, a shortcut procedure may be used by entering the
location number which takes you directly to the location name.
Selectable Locations:
Attic
Back door
Basement
Bathroom
Bedroom
Child room
Closet (UK: Conservatory)
Den (UK: Playroom)

4.5.3 Adding Wired Zones

Required tools: Cutter and slotted screwdriver - 3 mm blade.
PowerMaster-10 wiring is shown in Figures 4.1 – 4.4.
A
B
A. Cables entry options
B. Back unit
C. Cable clips
To Route the Cable:
1. Remove the left or right side cables entry knockout(s) and enter the required cable(s)
2. Remove and use as cable clamp(s)
D-303145
06:CUSTOM NAMES
Dining room
Downstairs
Emergency
Fire
Front door
Garage
Garage door
Guest room
CABLES ROUTING GUIDE
1
" menu, and these custom names will also
Hall
Kitchen
Laundry room
Living room
Master bath
Master bdrm
Office (UK: Study)
Upstairs
C
2
Utility room
Yard (UK: Garden)
Custom 1
Custom 2
Custom 3
Custom 4
Custom 5
25