Configuring Visual Verification (Motion Camera) - Visonic PowerMaster-10 Installer's Manual

4.7.5 Configuring Visual Verification (Motion Camera)

PowerMaster system supports visual alarm verification feature that enables monitoring stations to avoid
unnecessary responses to false alarms and to remotely assess the situation upon the occurrence of a true
alarm. After the installation of Next CAM PG2 PIR-Camera devices the PowerMaster will send images whenever
a burglary alarm occurs. The Monitoring Station staff can review images taken by the cameras prior to notifying
the authorities and provide detailed information to respondents about the emergency. In addition, cameras can
be used with fire detectors and panic buttons (see "To Setup Visual Verification for Personal Alarm and Fire
Alarm Events" below).
A. To Configure Image Forwarding
1.
04:COMMUNICATION
2.
1:PSTN/GSM
or
3.
5:MOTION CAMERA
4.
Image forward
5.
1st email
6.
7.
1st email
8.
1st email
9.
2nd email
10.
11.
2nd email
12.
2nd email
13.
3rd email
14.
15.
3rd email
16.
3rd email
17.
4th email
18.
52
Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".
Here you determine the 1
motion camera will be sent.
Enter the first email to which images will be sent.
Enter the second email to which images will be sent.
Enter the third email to which images will be sent.
st nd rd th
, 2 , 3 , 4 emails to which images from the
D-303145