Erasing And Exiting The Event Log - Visonic PowerMaster-10 Installer's Manual

8.2 Erasing and Exiting the Event Log

Z13 alarm
09/02/10 3:37 P
5.
CLEAR EVENT LOG
6.
<OFF> to delete
7.
<OK> TO EXIT
8.
READY 00:00
86
From anywhere within the event log, press the
Note: This is applicable only if the installer code entered.
At this stage in the procedure, clicking the
will take you to "<OK> TO EXIT" without erasing the event log. Clicking
the button will return you to "CLEAR EVENT LOG".
The system erases the event log and reverts to the normal operating
mode.
Clicking the
takes you one level up with each click. Clicking the
take you to "
<OK> TO EXIT
button repeatedly at any stage in the procedure
".
button.
or buttons
button will
D-303145