Visonic PowerMaster-10 Installer's Manual page 32

5.
Z01:LOCATION
6.
Front door
or
7.
Master Bdrm
8.
Z01:ZONE TYPE
9.
12.Non-Alarm
10
or
3. Home Delay
11.
Z01: SET CHIME
12.
Chime off....
13. or
melody-chime
14.
Z01:DEV SETTINGS
...........
MOTION SENSORS
D-303145
**
Select a location, or, enter the location number, for example, pressing 22
selects "Master Bdrm" (for the complete list of locations that may be
selected, see section 4.5.2.4 Locations).
Select a zone type, or, enter the zone type number, for example,
pressing 03 selects "3. Home Delay".
To understand the behavior of each zone, see section 4.5.2.3 Zone
Types.
Press to change chime settings or press the
skip.
Select between "CHIME OFF" and "melody-chime".
Note: In "melody chime" mode when a chime zone is triggered, a chime
melody is heard
***
* The displayed device LED indicator blinks red. You can click the
or
** If you are modifying a keyfob, keypad, or siren the display skips to
" ".
DEV SETTINGS
*** To perform Device Settings refer to the Installation Instructions of the
relevant device.
After modifying the device the PowerMaster-10 returns to "
". You can now press the
SENSORS
device of the same type, or press the
different device, or press the
".
EXIT
When exiting "
INSTALLER MODE
displays the number of devices that need to be updated, as follows: "
".
UPDATING NNN
buttons to select another device of the same type.
button to take you to "
" menu the PowerMaster-10 system
button to
MOTION
button to modify another
button to modify a
<OK> TO
DEV
31