Fastkcon Configuration File Format - HP Spooler FASTP Manual

Installation and Configuration Considerations for
FASTPTCP
CREATE command and a series of UPDATE commands to merge the additional files
into the FASTCNFG file created from the primary file as follows:
FASTKCUT CREATE cnfg-file,kcon-file
FASTKCUT UPDATE cnfg-file2,kcon-file
.....
FASTKCUT UPDATE cnfg-filen,kcon-file
For example:
FASTKCUT CREATE $SYSTEM.SYSTEM.FASTCNFG,*
FASTKCUT UPDATE $SYSTEM.SYSTEM.FASTCFG2,*
FASTKCUT UPDATE $SYSTEM.SYSTEM.FASTCFG3,*
FASTKCUT UPDATE $SYSTEM.SYSTEM.FASTCFG4,*
FASTKCUT UPDATE $SYSTEM.SYSTEM.FASTCFG5,*
FASTKCON files cannot be redirected; only a single FASTKCON file is used by a
FASTP network print process.
FASTKCON File Security
Like FASTCNFG files, a FASTKCON file usually contains information that should not
be accessible to all users (for example, passwords). The file can be secured by using
one or both of the following mechanisms:

FUP SECURE and FUP GIVE commands

Safeguard protection
For more information about file security, refer to the following manuals:

File Utility Program (FUP) Reference Manual

Safeguard Administrators Manual
Note that the file must be secured for read access by all of applicable the FASTPTCP
network print processes.

FASTKCON Configuration File Format

A FASTKCON file has the following format:
Key Offset
Key Length
Record Length
Record Layout
Bytes 0-47
Spooler FASTP Network Print Processes Manual — 427528-006
0 bytes
48 bytes
4000 bytes
Name field. For DEVICE records, specifies the name in uppercase
ASCII, left-justified, blank filled. For POLLTYPE records, specifies
FASTKCON Configuration File Format



3 - 50