HP Spooler FASTP Manual page 247

EMS Messages
60
proc-name DEV: device-name FASTCNFG error in: cnfg-file 
Param: param-name
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
cnfg-file
is the name of the FASTCNFG or FASTKCON file.
param-name
is the parameter name from the FASTCNFG entry.
There might be two causes for this message. The first cause is:
Cause. The value specified for the parameter in the FASTCNFG entry is syntactically
incorrect or specifies an invalid value.
Effect. The default value for the parameter is used. In some cases, this might prevent
printing. In other cases, the job might be printed incorrectly.
Recovery. Correct the FASTCNFG or FASTKCON entry, and either restart the Spooler
device or send a new print job.
The second cause is:
Cause. No entry exists for the specified device in FASTCNFG or FASTKCON. The
absence of the device entry is first noticed when the FASTPTCP process looks up the
first parameter for the device. Instead of a message specifically indicating the device is
not found, this message indicates an error in the specified param-name. For
FASTPTCP, the parameter is typically reported as ADDRESS. FASTPTCP also
displays the related message number 61.
Effect. No printing occurs, the Spooler job is requeued, and the Spooler device is
placed offline.
Recovery. Add the device record to FASTCNFG as described in
FASTCNFG File
FASTKCON file, and restart the Spooler device. (Depending on the device
configuration, the device might restart automatically.)
Spooler FASTP Network Print Processes Manual — 427528-006
on page 2-17. If necessary, run FASTKCUT to generate the
B - 35
FASTPTCP Event Messages
Configuring a