HP Spooler FASTP Manual page 238

EMS Messages
45
proc-name DEV: device-name MBCS Substitute Shift to DBCS
string too long, Job: job-num
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
job-num
is the job number.
Cause. CONTROLBUF 110 was used to supply a substitute shift-to-DBCS string
to the MBCS_TANDEM_TO_EXTERNAL procedure, and the supplied string exceeds
twenty bytes in length.
Effect. The string is truncated to twenty bytes.
Recovery. If the error persists, contact your service provider as described in
Troubleshooting and Reporting Problems
46
proc-name DEV: device-name MBCS Substitute Shift to SBCS
string too long, Job: job-num
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
job-num
is the job number.
Cause. CONTROLBUF 110 was used to supply a substitute shift-to-single-
byte string to the MBCS_TANDEM_TO_EXTERNAL procedure, and the supplied
string exceeds twenty bytes in length.
Effect. The string is truncated to twenty bytes.
Recovery. If the error persists, contact your service provider as described in
Troubleshooting and Reporting Problems
Spooler FASTP Network Print Processes Manual — 427528-006
on page 8-1.
on page 8-1.
B - 26
FASTPTCP Event Messages