HP Spooler FASTP Manual page 273

EMS Messages
Effect. Shadow tracing is not performed.
Recovery. Purge the shadow trace file and ensure that Safeguard permits access to
the shadow file.
512
proc-num DEV:device-name Cannot find CONTYPE in 
file cnfg-file
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
cnfg-file
is the name of the FASTCNFG file.
Cause. This message applies to all FASTP network print processes except
FASTPTCP. The connection type (CONTYPE) attribute and value has not been
specified for a device in the specified FASTCNFG file.
Effect. The Spooler device is placed offline; the FASTP network print process
continues processing other print jobs.
Recovery. Correct the error in the FASTCNFG file. Note that the value of the
Spoolcom DEV EXCLUSIVE attribute can affect whether changes to the FASTCNFG
file are read. The FASTP network print process reads the updated FASTCNFG file
before it sends a job to the device if the device has the Spoolcom DEV EXCLUSIVE
attribute set to EXCLUSIVE OFF (the default). If the device has the EXCLUSIVE
attribute set to EXCLUSIVE ON, the attribute must be changed to EXCLUSIVE OFF! to
force the FASTP network print process to read the updated FASTCNFG file. For more
about the effect of the EXCLUSIVE attribute on the FASTCNFG file, see
File Alteration
If the error persists, contact your service provider as described in
Reporting Problems
Spooler FASTP Network Print Processes Manual — 427528-006
on page 2-19.
on page 8-1.
B - 61
FASTP EMS 512 Text Messages
FASTCNFG
Troubleshooting and