Setmode 260; Table 3-4. Supported Setmode 260 Param1 Values For Lpd Devices - HP Spooler FASTP Manual

Installation and Configuration Considerations for
FASTPTCP

SETMODE 260

SETMODE 260 enables PostScript printing and has the following syntax:
SETMODE operation param1 param2
where param1 dictates the language and param2 is ignored.
param1 values that have special meanings for LPD devices:

Table 3-4. Supported SETMODE 260 Param1 Values for LPD Devices

Value Meaning
0 PCL mode
1 Transparent
PostScript
2 Smart PostScript
3 CIF
4 DVI
5 Formatted
6 PLOT
7 Leaving Control
8 DITROFF
9 PR
10 FORTRAN
11 TROFF
12 RASTER
13 "f" PostScript
14 Default
Spooler FASTP Network Print Processes Manual — 427528-006
Action
FASTPTCP emits the l - Leave controls command.
FASTPTCP emits the o - Print PostScript
output file command.
FASTPTCP emits the o - Print PostScript
output file command and in addition takes steps to
ensure that only valid PostScript data is sent to the
printer.
FASTPTCP emits the c - Plot CIF file command.
FASTPTCP emits the d - Print DVI file command.
FASTPTCP emits the f - Print formatted file
command.
FASTPTCP emits the g - Plot file command.
FASTPTCP emits the l - Print file leaving
control characters command.
FASTPTCP emits the n - Print ditroff output
file command.
FASTPTCP emits the p - Print file with 'pr'
format command.
FASTPTCP emits the r - File to print with
FORTRAN carriage control command.
FASTPTCP emits the t - Print troff output
file command.
FASTPTCP emits the v - Print raster file
command.
FASTPTCP treats the data as PostScript but emits the f
- Print formatted file command. This value is
used for certain LPDs that do not recognize the o - Print
PostScript output file command but can cope with
receiving PostScript data.
FASTPTCP emits the f - Print formatted file
command.
3 - 55
SETMODE 260
Table 3-4 lists the