HP Spooler FASTP Manual page 274

EMS Messages
512
proc-num DEV: device-name Cannot find SHADOW entry in
FASTCNFG file
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
Cause. Bit 1 (%40000) was specified for the Spooler DEV PARM attribute, but the
FASTCNFG or FASTKCON DEVICE entry did not specify a SHADOW attribute.
Effect. Bit 1 is ignored, and no shadow tracing is performed.
Recovery. To enable shadow tracing, add a SHADOW attribute to the FASTCNFG or
FASTKCON file. Otherwise, delete the value of bit 1 (%40000) from the Spooler DEV
PARM attribute value to eliminate this message.
512
proc-num DEV:device-name Cannot obtain buffer for MBCS
Translation, Err: err-num
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
err-num
is a file-system error code or other internal FASTPTCP error code.
Cause. The FASTP network print process could not allocate a workspace for MBCS
translation.
Effect. The Spooler job is requeued, and the Spooler device is placed offline.
Recovery. If the error persists, contact your service provider as described in
Troubleshooting and Reporting Problems
Spooler FASTP Network Print Processes Manual — 427528-006
on page 8-1.
B - 62
FASTP EMS 512 Text Messages