HP Spooler FASTP Manual page 332

EMS Messages
Recovery. Reduce the entries in the SVCLIST to 256 or fewer entries and restart the
Spooler device. (Depending on the device configuration, the device might restart
automatically.)
512
proc-num DEV: device-name SVCLIST - SVCMACRO conflict in
fastcnfg
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
fastcnfg
is the FASTCNFG file name.
Cause. This message applies to FASTPX25 only. Both the SVCLIST and
SVCMACRO attributes were specified in the FASTCNFG file for this device. You
cannot specify both of these attributes for the same device.
Effect. The device is placed offline.
Recovery. Remove either the SVCLIST or SVCMACRO attribute from the FASTCNFG
file and restart the Spooler device. (Depending on the device configuration, the device
might restart automatically.)
512
proc-num DEV: device-name Tempfile temp-name operation 
Err: file-err [Ext:ext Max: max]
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
temp-name
is the name of the temporary disk file, either from the FASTCNFG parameter
TEMPFILE or a default name.
Spooler FASTP Network Print Processes Manual — 427528-006
B - 120
FASTP EMS 512 Text Messages