HP Spooler FASTP Manual page 255

EMS Messages
72
proc-name DEV: device-name Tempfile temp-name IO 
Err: file-err
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
temp-name
is the name of the temporary disk file, either from the FASTCNFG parameter
TEMPFILE or a default name.
file-err
is a file-system error code. See the Guardian Procedure Errors and Messages
Manual for explanations of file-system errors.
Cause. The FASTPTCP process uses a temporary file to stage print job data with
PROTOCOL = LPD. A file-system error was detected when using this file during an I/O
operation.
Effect. The Spooler job is terminated and requeued, and the Spooler device is placed
offline.
Recovery. Purge the file specified for the TEMPFILE parameter for the device. If
TEMPFILE specifies a complete file name, either use a unique file name for each
device, change TEMPFILE to specify only a disk volume name, or completely omit the
TEMPFILE parameter. Verify that Safeguard permits access to the specified
TEMPFILE.
Spooler FASTP Network Print Processes Manual — 427528-006
B - 43
FASTPTCP Event Messages